Mahindra 4110 Tractor

SUPERIOR PERFORMANCE:

	Higher lift capacity: Handle larger implements... Get work done a lot faster.
	Heavy-duty components: Tough and rugged... Keep right on performing day after day.
	Sturdier chassis: Greater stability... Keeps you safe while handling rigorous work.
	Heavier chassis: Additional weight... Provides extra traction.

MAHINDRA 4110 SPECIFICATIONS

ENGINE 4A200 Type : Four stroke, indirect injection, water-cooled, diesel Cylinders : 4 Engine HP (kW) @ RPM : 41 (30.6) @ 2700 Compression Ratio : 22:1 Displacement : Cubic inch (cc):122 (2000)	HYDRAULIC SYSTEM Type : Open Center,full-live hydraulic with position and draft control Pump Output (gallons/minute) : 7.87 3-Point Linkage : Category 1, with check chains Lift Capacity (Ibs) : 2865 Auxillary Remote Valves : 1 Standard	DIMENSIONS Overall Length Inches (mm) : 139 (3531) Overall Width Inches (mm) : 58.7 (1490) Turning Radius Minimum (mts) : 3.1	TRANSMISSION Type : Forward-Reverse Synchro-Shuttle with partial synchro speed Number of Gears : 12 forward, 12 reverse
ELECTRICAL Battery Capacity : 12 volt,110 amp hours Alternator : 12 volt, 50 amps	PTO Type : Independent Rear PTO with safety mechanism and electro-hydraulic clutch PTO RPM : 540 @ 2524 engine rpm 1000 @ 2866 engine rpm PTO HP (kW) : 33.6 (25.1)	STEERING Type : Hydrostatic power Pump Output (gallons/minute) : 4.64	CLUTCH Type : Single plate, dry
BRAKES Type : Wet disc	OPERATING WEIGHT Total (Ibs) : 3969	FRONT WHEEL DRIVE Type : Mechanical
Specifications and design subject to change without notice.