Mahindra 3510 Tractor

SUPERIOR PERFORMANCE:

	Higher lift capacity: Handle larger implements... Get work done a lot faster.
	Heavy-duty components: Tough and rugged... Keep right on performing day after day.
	Sturdier chassis: Greater stability... Keeps you safe while handling rigorous work.
	Heavier chassis: Additional weight... Provides extra traction.

MAHINDRA 3510 SPECIFICATIONS

ENGINE 3A165 Type : Four stroke, indirect injection, water-cooled, diesel Cylinders : 3 Engine HP (kW) @ RPM : 35 (26.1) @ 2700 Compression Ratio : 22:1 Displacement : Cubic inch (cc):100(1648)	HYDRAULIC SYSTEM Type : Open Center,full-live hydraulic with position and draft control Pump Output (gallons/minute) : 7.87 3-Point Linkage : Category 1, with check chains Lift Capacity (Ibs) : 2865 Auxillary Remote Valves : 1 standard	DIMENSIONS Overall Length Inches (mm) : 139 (3531) Overall Width Inches (mm) : 58.1 (1475) Turning Radius Minimum (mts) : 2.4	TRANSMISSION Type : Forward-Reverse Synchro-Shuttle with partial synchro speed Number of Gears : 12 forward, 12 reverse
ELECTRICAL Battery Capacity : 12 volt, 110 amp hours Alternator : 12 volt, 50 amps	PTO Type : Independent rear PTO with safety mechanism and electro-hydraulic clutch PTO RPM : 540 @ 2524 engine rpm, 1000@2866 engine rpm PTO HP (kW) : 28.7 (21.4)	STEERING Type : Hydrostatic power Pump Output (gallons/minute) : 3.57	CLUTCH Type : Single plate,dry
BRAKES Type : Wet disc	OPERATING WEIGHT Total (Ibs) : 3881	FRONT WHEEL DRIVE Type : Mechanical
Specifications and design subject to change without notice.