Mahindra 2015-HST Tractor

SUPERIOR PERFORMANCE:

	Higher lift capacity: Handle larger implements... Get work done a lot faster.
	Heavy-duty components: Tough and rugged... Keep right on performing day after day.
	Sturdier chassis: Greater stability... Keeps you safe while handling rigorous work.
	Heavier chassis: Additional weight... Provides extra traction.

MAHINDRA 2015 HST SPECIFICATIONS

ENGINE Mitsubishi S3L Type : Four stroke, indirect injection, water-cooled, diesel Cylinders : 3 Engine HP (kW) @ RPM : 20 (14.9) @ 2500 Compression Ratio : 22:1 Displacement : 68.6 (1125) cubic inch (cc)	HYDRAULIC SYSTEM Type : Open Center, full-live hydraulic with position control 3-Point Linkage : Category 1, with check chains Lift Capacity (Ibs) : 1400 Auxillary Remote Valves : 1 set option Pump Output (gallons/minute) : 5.8	DIMENSIONS Overall Length Inches (mm) : 106.5 (2705) Overall Width Inches (mm) : 46.3 (1175) Turning Radius Minimum (mts) : 7.2 (2.2)	TRANSMISSION Type : HST - 2 Ranges No. of Speeds : Infinite
ELECTRICAL Battery Capacity : 12 volts, 46 amp hours Alternator : 12 volts, 50 amp	PTO Type : Live. Optional 60" mid-mount mower attachment available PTO RPM : 540 @ 2356 PTO HP (kW) : 16 (11.9) MID PTO RPM (engine rpm) : 2000 @ 2470	STEERING Type : Hydrostatic power Pump Output (gallons/minute) : 3.4	Tires Sizes and Options Industrial (Front / Rear) : 23x8.5-12 / 12x16.5 Turf (Front / Rear) : 23x8.50-12 / 33 x 12.5-16.5
BRAKES Type : Dry Shoe	OPERATING WEIGHT Total (Ibs) : 1973	FRONT WHEEL DRIVE Turning Radius Minimum (mts) : Mechanical	CLUTCH Type : Single plate, dry
Specifications and design subject to change without notice.